I am going to show you how to get the best backlinks for YouTube videos for fast ranking.
Video embeds on high PA Tumblr blogs is the way to do this.
The more video embeds you do the better.
You can do this manual, however it is going to take a lot of time.
So to speed up the whole ranking process we are going to use a Tumblr bot.
The bot will do the video embeds for us at lightening speed.
This bot is called TumblingJazz and is available to buy for a one off payment of just $77.
It does a whole lot more than just video embeds.
If you have a lot of videos to rank it is going to come in very useful indeed.
We also offer a video embeds service in our store, just to let you know.
You get 100 powerful video embeds for just $15, let us do all the work for you.
Before you go ahead and start building backlinks to your video you need to ensure that your video is fully optimised.
We have a blog post that shows you how to rank videos here, the complete process from start to finish.
We also offer a video optimisation and ranking service in the Rankers Paradise store here.
In this service we will fully optimise your video and rank it on page 1 of YouTube fast in under 24 hours.
After that is taken care of, you can go ahead and do the video embeds as outlined below to rank your video high in Google SERPs.
Let’s get started.
Best Backlinks For YouTube Videos
Go ahead and open up the Tumbling Jazz software.
If you are completely new to the software then you are going to need to add your Tumblr accounts.
I will show you how to do this right now.
I am going to do 100 video embeds/backlinks using the software, so I will add 100 accounts.
It is quick and easy to do, you can also add secondary accounts too with ease.
First select the “View Accounts” button circled in red at the top left of your dash.
Then go ahead and hit the “add” button circled red, bottom right of the interface.
The only details you need to add is the Tumblr account email and password.
If you are adding a secondary account you will need to add the secondary account name too.
You will need to do this process for every account you add.
Yes you have to add the accounts individually, it takes a bit of time initially, but if you have a lot of videos to rank it is going to be well worth it in the long run.
You can un-check the “Validate on save” radio box, it is not required.
Then go ahead and hit the “Save” button.
That’s it, go ahead and add all your Tumblrs into the software.
Add as many accounts as you wish to do so.
You can even assign a proxy for each account.
I don’t bother with proxies.
I have 100 accounts loaded into Tumbling Jazz without using proxies and have not lost any of my accounts.
Now let’s get those video backlinks.
First of all you need to set up a file containing the details of the video that you would like to embed in your Tumblr blogs.
This is an example of what your video file should look like.
So I will go ahead and open Notepad and set up my video file.
This is what my video file looks like.
As you can see I have the video URL that I want to embed followed by a short description of the video.
After the description I have included some tags (will be your keywords) followed by the video URL again.
I should also mention that you do not need to enter all this information, you can simply enter the video URL only if you wish to do so.
However it is a good idea to get your keywords in the description and in the Tags too.
Save the file, now we can move onto the next step.
Next we need to load the file into the software so it knows which video to embed to our Tumblr blogs for us to get those powerful video backlinks in place.
Click the “YouTube” button circled red.
Now we need to select the file we just created.
Click the “Select File” button circled red in the image above.
Then select the file you just created.
Now hit the “Import File” button.
If you have entered the information into the NotePad doc correctly you will see your YouTube URL, description, Tags, URL Stub and Source information loaded into the correct columns inside the software as shown above.
Next we need to select the Tumblr accounts we want to post our video to.
I have hit the “Select All” text circled red at the bottom left of the screen.
You can also select or de-select the accounts individually by clicking the radio tabs (circled red) as shown above.
Hit the “Post Videos” button and let the software do it’s stuff.
To check the progress of your project click on the “Processor” icon circled red above.
If your new project status is “waiting” go ahead and click the “Run” button.
This will change the progress status to “Processing”.
To see a progress report simply double click on your project.
The software will give you a full run down of which Tumblr account it is currently logging into and posting to.
Simply sit back and wait for the software to do all those lovely powerful backlinks to your video.
To get the URLs of the of your video embeds you need to do the following.
To access your backlinks report go to help, Logs and the hit the “posted Content Logs” option.
This will give you access to the file with all Tumblr post URLs where your video embeds exist.
Here is what my video embed looks like:
As you can see, the video embed matches the information I submitted to Tumbling Jazz using the embed file option.
The software took around 30 minutes to do 100 video embeds for me.
This will help rank any video higher in the SERPs for any selected keywords.
Of course Tumbling Jazz does a whole lot more, which we will discuss at another time.
These are without doubt the best backlinks for youtube videos, go ahead and feel the power for yourself.
How are we going to prove that this service works?
You can also buy our link building services to get a top ranking.
Our selected keyword is “best place to buy backlinks”.
It has a low seo competition score and low search volume.
I’m not bothered about that, I just want to find out how effective these backlinks can be.
So I am going to publish this post and log the results.
As you can see, it’s a super easy keyword with a very low seo competition score of just 16.
Right, let’s take a closer look at the automatic backlinks website.
Is AutomaticBacklinks.com The Best Place To Buy Backlinks?
First and foremost, this service is free with the option to buy backlinks should you want to do so.
It is a link exchange system that uses a plugin on your WordPress, Joomla, Drupal, php, .net and more to build backlinks on virtual autopilot.
You can find the best backlinks of all, which are niche related contextual links.
If you go down the free route the simple formula is:
Give a backlink out, get a backlink in return.
The more backlinks to give, the more backlinks to get in return.
If you don’t like the sound of a link exchange system, then you can buy backlinks, which gets you a one way backlink without the return link needed.
The network of sites is monitored to ensure only quality sites are available.
Automaticbacklinks.com ensure that their is no footprint, even when you use the plugin on your site.
It’s pretty much a set and forget backlink source after you have added the plugin to your site.
The video below explains how it all works:
Now you need to head on over to site and sign up for a free account.
I only want one way backlinks, so I am going to buy backlinks for this little ranking test.
Is this really going to prove to be the best place to buy backlinks?
Let’s find out right now.
Okay, so you have your account, what’s next?
When you login you will first see your dashboard.
If you want one way niche related contextual backlinks you need to buy some link credit.
Click on the “buy link credit” text as shown is the image above.
To buy 50 Link Credits it is going to cost you $50.
I have added 50 credits into my accounts.
Let’s take a look at what kind of backlinks we can get to this post for $50.
To get started we need to start a backlink campaign.
Go ahead and click on “Add Backlink Campaign” as shown.
Name your backlink campaign and select a topic from the drop down menu.
Make sure your topic is as close to your niche as possible.
We only want high quality niche related backlinks here.
Now select the radio box for the niche related sites you would like backlinks from.
As you can see, you can set the link credit that you would like to use for the backlink building campaign.
I have set this campaign to only deliver one backlink per site and to build a maximum of 10 backlinks per day.
Finally you have the option to limit what top level domains your backlinks will be shown on.
Go ahead and hit the “save” button to finish off.
Now we need to add our URL into the system.
After you have hit the save button you will be shown the page below:
Now you can click on the “Add Link Variation” button to add your URL into the system to buy backlinks.
Now you can enter your anchor text for your backlink.
You also have the option to set the text that is before and after your backlink.
When you are satisfied hit the “Save changes” button.
You can go ahead and add more anchor text options if you wish to do so.
I am going to use exact match anchors and full open URL anchors.
That’s it, sit back and wait for the backlinks to roll in and watch your website rank up.
I am going to log the results here and give some feedback on the quality of these backlinks.
Let’s find out if the backlinks will rank this post top for the selected keyword.
Post is published on Monday 30th October 2017.
To see the backlinks you have purchased simply return to your dashboard.
I had 2 backlinks to this post within ten minutes using 14 credits of the 50 I have purchased.
I am interested to see if these backlinks will rank this post for the selected keyword.
I will keep everyone posted on the ranking results and the number of backlinks built.
Within 35 minutes of setting off my Automatic Backlinks campaign I have 10 backlinks pointing to this post.
10 backlinks has cost be 40 link credits.
So you are buying backlinks for just $1 here.
The big question is, will these cheap backlinks rank a website top of Google search?
You simply click the “View Backlinks” button to see all the websites that you have a backlink from.
It’s Been 2 Days:
Right, so it has been 2 days since this post was first published.
I will show you the backlinks that has been created and the ranking report.
So we now have 13 backlinks purchased pointing at this post, which has just about used up all my $50 link credit.
This means you are paying around $4 per backlink, which is very cheap indeed.
The big questions is, in just 2 days have these backlinks influenced this posts Google ranking.
Let’s take a look:
As you can see, this post is ranked on the first page of Google for it’s selected keyword.
We have a Google rank 4 in just 2 days.
I have not indexed any of the backlinks, so it is a set and forget strategy here.
I suspect as Google bot finds more of the backlinks this page will get to number 1.
I will keep everyone posted on the ranking results.
Please be aware that these backlinks are mostly in the footer or on the sidebar of the websites, they are not great quality.
However, they are certainly good enough for a quick rank boost, and will certainly rank easy keywords.
5 Month Rank Check:
okay, the post has been live for 5 months.
This page is now rank no. 2 for the selected keyword, as you can see in the image above.
The ranks have stuck and the post has gone up.
I have not got any more backlinks other than the ones I did in the tutorial.
Nice little set and forget ranking tactic 🙂
I am going to show you how to build a web 2.0 link wheel manually and with the use of software too.
This ranking strategy got me a Google page 1 ranking on day 1.
In around 30 days the strategy got me a Google.com and Google.co.uk rank 1 for my selected keyword.
I am going to show you how I did it for free.
You can do it yourself for free or……..
You can get the strategy done for you right here in the Rankers Paradise SEO store.
I have logged the results below, this is a proven strategy you can use yourself.
You can even check my results for yourself to know for certain that it will work for you too.
Most importantly I am going to show you the rank effects of a powerful link wheel like this.
You can follow the tutorial to build your very own link wheel.
So what is a link wheel?
It’s simply linking up your sites one by one into a wheel formation so that they are not orphaned pages.
The seo link wheel can be a very powerful rank strategy when done the right way.
I am going to point the backlinks to this post to see the rank effects.
I will do a small 5 site web 2.0 link wheel on tier 1.
On tier 2 I will point 10 high PA Tumblrs to each of the 5 web 2.0 posts.
I am not going to write any of the content myself for any of the sites.
I am going to use SEO Content Machine to generate some unique content.
Let’s get right into it;
Web 2.0 Link Wheel Tutorial
First of all we need to set up 5 web 2.0 sites.
To do that we are going to require a fresh email.
You can set up a free email account at the following sites:
Go ahead and get yourself a free email, you only require one. We can use the one email address to set up all five web 2.0 sites.
Now you have your email set up you need to register five Web 2.0 sites for use in the link wheel.
The five Web 2.0 sites I am going to use on tier 1 are;
Go to each Web 2.0 site and set up an account. If you want a list of other web 2.0 sites that you can use go to my free backlinks post.
Make sure you get your keyword into the Web 2.0 sub domain.
I am looking to rank this page for the keyword “Web 2.0 Link Wheel” so I will make sure it sits in the blog sub domain URL.
For example, if you have the keyword “best epilator” you would want your Web 2.0 URL to look like this:
If the exact match keyword blog URL is taken add another word to the end, so you will have something like this:
bestepilatorsite.tumblr.com or even bestepilatorblog.tumblr.com
I think you know what I mean.
Now that you have your Web 2.0 blogs set up you need to get some content to post onto them.
I am going to use SEO Content Machine to generate the content for me.
If you do not have SEO Content Machine you have a few other options available.
You can either write the content yourself by hand, which is by far the best method, but the most time consuming.
You can go ahead and use the free blog content generators outlined in one of my previous posts.
Or you can buy some content for use on your blogs. You can use this service here to get the job done.
Generate Unique Content
I am going to show you how to generate unique content using SEO Content Machine.
I want these sites up and live as fast as possible, so I am going to generate the content.
Go ahead and fire up your copy of the SEO Content Machine software.
Click on the “Generate Articles” icon.
Add your keyword into the “Keywords” box.
Make sure you select the article quality to be “Unique”, this is very important.
We want the content to be as long as possible. So I set the Paragraph count from 25 to 50 and have paragraph Min Words set to 50.
Use the in built spinner “Soft Spin”, which is very good. Then set your article count to 5.
Make sure you select “No Spintax” and choose a folder on your pc to save your content to.
Now you can hit the “Run Task” button. Make sure the “Run Immediately” radio box is checked.
When the content is complete we will optimise it for posting onto our web 2.0 sites. I will show you exactly how to do this right now.
How To Optimise Your Web 2.0 Content
We will optimise the content as we drop it onto our web 2.0 sites.
Before you drop the content onto the web 2.0 sites you need some images. You need around 10 images, make sure you get your keyword into the file name of the image.
The anchor text I will use for the Tier 1 backlinks will be;
- TITLE TAG
- Full Open URL
- Long Tail Exact
You can check out my perfect anchor text ratio post to understand why I chose these anchors.
Right, let’s drop the content onto the web 2.0 sites, to get the most benefit from it you need to do the following things.
- Add your keyword at the beginning of the title
- Put your keyword at the top, in the middle and at the end of the content. (if it’s a long piece of content drop the keyword in there a few more times). Make sure one of the keywords is in bold type.
- Put the keyword in a heading on the page.
- Add the images to your post. Make sure the images have the keyword in the file name, also add the keyword to the image ALT TAG if it is possible.
- Add the backlink to your money site above the fold. I always put the backlinks in the first paragraph. If you are not using exact match anchors make sure your chosen keyword is close to your anchor, this is very important.
- Add another backlink to an authority site. Google your keyword, go to page 4 or 5 and find a site that has high domain authority and drop a backlink to it, do not use exact match anchors, use generic anchors for these.
- Go to youtube and pop your keyword in the search box. Use a different video on each web 2.0. Use the top 5, whichever ones you choose.
That’s it, go ahead and drop the content on all 5 web 2.0 sites. Make sure you optimise each site as suggested above.
Now your web 2.0 sites will have fully otpomised content on them with a backlink to your money site.
Now it is time to link the 5 web 2.0 sites together into what is know as a link wheel.
Create The Web 2.0 Link Wheel
Now we need to go ahead and develop the web 2.0 link wheel. It is really very easy to do, this is how you do it;
This is how you set up your link wheel;
- Tumblr links to Weebly
- Weebly links to WordPress
- WordPress links to Kinja
- Kinja links to Blogger
- Blogger links to Tumblr
Go ahead and link up your web 2.0 blogs. Use all long tail exact anchors, this means you must have your exact keyword in the anchor.
Here is an example of a long tail exact anchor:
If my keyword is “best fishing knife” then a long tail exact anchor for this would be “see this best fishing knife guide here”.
Get thise 5 web 2s linked up now. This ensures your money site gets backlinks and your web 2.0 sites gets backlinks. This ensures your web 2s are not orphaned pages, which is very important.
Also, make sure you link to the web 2.0 post page, not the web 2.0 home page.
Make sure you index those tier 1 backlinks too, you can use Google Console for this. Do not worry if the links do not remain in the index, the tier 2 backlinks will help sort that little problem out.
Now I have my tier 1 web 2.0 backlinks set up, it is time to pump out some tier 2 backlinks.
Tier 2 Backlinks
On tier 2 I am going to build 10 high PA Tumblr backlinks to each tier 1 web 2.0 site.
I am going to use FCS Networker to get my tier 2 backlinks, of course you can do this manually.
Or you can use an seo clerks service for it. The service here offers 50 high PA Tumblr backlinks, and you can split the URLs, which means you can give the seller your 5 tier 1 URLs and get 10 backlinks to each of them.
This is how you can get Tumblr backlinks fast using FCS Networker;
Go ahead and log into your FCS Networker account.
If you are completely new to FCS Networker you will need to add your Tumblr blogs into the system. I have covered this in my FCS Networker guide, so I won’t go over that again here.
I assume that you have your Tumblr blogs loaded into FCS Networker and you are ready to roll out the backlinks.
I am going to use FCS Networker to generate the content for the web 2.0 tier 2 backlinks, it actually produces really good content.
Select “Link Sets” and click on the “Add Link Set” tab.
This is how we are going to set up the anchors used on the backlinks to our tier 1 web 2.0 sites.
We are going to set up 5 link sets.
All tier 2 backlinks will point to the tier 1 post page, not the home page.
All 10 anchors are going to be long tail exact match anchors. You will need to enter 10 different long tail anchors into the system.
You are going to create 5 link sets, one for each web 2.0 site on tier 1.
Enter your link set name.
Enter the URL of the web 2.0 site on tier 1.
Then drop 10 long tail exact match anchors in the “Main Anchors” text box.
Next you need to scroll down and hit the “Add Links” button.
Click on “Create Projects” (circled red) and give your project a name.
Make sure that “Submission Style” is set to “Post Amount Per Project” and that you have the “Evenly” radio tab selected for “Submit Posts Across Accounts”.
Scroll down the page and select the “Linking” tab.
Click on the “Choose Links Sets” button and select one of your link sets that you set up earlier. Leave everything else set on default.
You can add authority link into the mix if you want to, I am not going to do this. I want all the rank juice to flow to the web 2.0 sites.
Then click on the “Images/Videos” tab.
Simply drop your keyword into the images section. The software will add web 2.0 related images into the tier 2 blog posts for me.
Ignore the rest of the tabs, we do not need to use them. Now scroll back to the top of the project page.
To select the Tumblr accounts that you want to use on tier 2, first select the “Accounts” tab and then click the “Add Accounts” button.
You will then be presented with a list of all the web 2.0 accounts you have in the software, check the radio button of the the 10 Tumblrs that you wish to use.
Now click on the “Articles/Content” tab and click the “Auto-Gen Content” radio tab.
Pop your main keyword into the “keyword” text box and select a category for your content.
Make sure that you select the content quality to “Readable” and set how many paragraphs you wish to have.
Then check the “Submit To All Accounts Once” tab.
Scroll down and hit the “Save Project” button.
FCS Networker will now drop 10 Tumblr backlinks to your tier 1 site.
Repeat this process for the other tier 1 web 2.0 sites within the link wheel.
Make sure all the sites get 10 high PA Tumblr backlinks, that will be more than enough to get things moving, especially for easy to rank keyword.
That’s it, you now have a super powerful link wheel on tier 1 powered up with some dirty tier 2 rank juice. You can drop this link wheel into month 2 of my powerful web 2.0 backlinks strategy.
This is a great way to rank any website, or get a page moving up the SERPs again.
You can create the web 2.0 link wheel with FCS Networker software, I am going to show you how to do that right now.
SEO Link Wheel Software
If you have FCS Networker you can use it to build the tier 1 web 2.0 link wheel for you on complete auto pilot.
I will go through this step by step for you right now, you can also take a look at this video to get the job done also.
First of all you will need to load your web 2.0 accounts into the software.
FCS Networker even has a built in account creator option, so you don’t even have to do that manually these days.
You can have the software set up the web 2.0 accounts for you.
For this tutorial I am going to assume you have the web 2.0 accounts set and ready to roll, so lets get them loaded into the software and ready to post to onto.
First lets import your web 2.0 accounts into the software. Click on “Accounts” and then “Blog Accounts” and then select “Import Bulk Accounts”.
Now add your 5 web 2.0 accounts into the software that you are going to use in the link wheel.
You need to enter them in this format:
Pop them into a category and hit the “Add Accounts” button.
Before you start your link wheel project you are going to need to set up a link set for your money site. Select the “Link Sets” option and then hit the “Add Link Set” button.
Go ahead and add your money site URL and main anchors. Drop the 5 anchors in there that you want to be used on each of the 5 web 2s in the link wheel.
Then scroll down and hit the “Add Links” button. Now you are ready to create the link wheel with the software.
Click on “Create Projects” then “Create Blog Projects” and then give it a name.
Now scroll down to the link wheel section.
Select the “Link Wheel” radio tab.
When you click the “Target Links” tab you can select the link set that you set up earlier, this will be the link to your money site.
Then you need to select the “Link Wheel Anchors” button, this is the 5 anchors you are going to use that link one web 2.0 blog to the other.
You can also select the “Authority Links” tab to get some links into your articles from authority sites within your niche.
Make sure you set the “Target Links Per Article” from 1 to 1.
Select the “Accounts” tab and then click the “Add Accounts” button. Now select the 2 web 2.0 accounts that you are using in the link wheel.
Now select the “Articles” tab and go ahead and get your content loaded into the software. You can Auto-Gen the content or upload your own articles, the choice is yours.
Now scroll down to add images and videos to your post.
Select the Images/Videos tab and select the options to add images and videos into your posts. You can use your own images and videos, or have the software get them for you.
Then hit the “Save Project” put and let the software build the web 2.0 link wheel for you on complete auto pilot.
I will log the rank results here for you all to see the effects of the link wheel. If I need to power it up I will add more tier 2 backlinks further down the line.
As it stands this will be enough to get me ranking high for such a easy keyword.
Link Wheel Service
Post published: 09/04/2017
I indexed the post right away using Google console.
Then I indexed all 5 tier 1 backlinks on the same day, the day the post was published on the 09/04/2017.
I will index the tier 2 backlinks over the next few weeks.
Rank Check on 09/04/2017 the day the post was published.
So the day the post is published I have a Google.com and Google.co.uk rank 5.
That’s how powerful these seo link wheels can be.
Yes it’s an easy keyword, but this is what can be achieved on day 1.
That is how to get a first page Google ranking real fast in just 1 day.
When I index the tier 2 backlinks over the next few weeks the site will hit Google rank 1.
Rank Check: 18/05/2017
This page is now ranked top for it’s selected keyword.
In less than 39 days I have achieved a top Google ranking on Google.com and Google.co.uk.
That’s the power of 5 web 2 sites in a link wheel formation.
Remember you can get this exact ranking strategy done for you right here in the Rankers Paradise SEO Store.
Of course you can do it all yourself for free 🙂
Today I am going to show you how to use FCS Networker automated link building software.
You can use the software to build backlinks on just about any Web 2.0 platform.
The software even comes with an add on to allow you to set up new Web 2.0 blogs on complete auto pilot.
FCS Networker will allow you to do my Web 2.0 backlinks strategy in less time, it’s not required of course, but it certainly speeds up the process.
The good news is that you do not require proxies to use the software, and it even has a built in content generator for posting fast to your high page authority Tumblr network.
As you probably already know, I use SEO Content Machine for generating content for my backlinks.
For this tutorial I am going to use the content generator that comes with FCS Networker. This will give you the chance to see just how good this platform really is.
So what am I going to do?
I am going to build 50 high page authority Tumblr backlinks to my epilator Amazon affiliate site. Follow the link to read about my Amazon affiliate site case study.
I will reveal how long it takes me to build 50 backlinks with FCS Networker, I will also show you the quality of the backlinks that it generates.
I have no problem using these backlinks on tier 1, however they are very effective used on tier 2 fired at a premium Weebly blog. You can get premium Weebly blogs done on seo clerks, I have used them myself and know first hand that they are very effective at pushing ranks. This service will also do the 50 high page authority Tumblr backlinks on tier 2 for you.
Alright, let’s get started pumping out those backlinks;
How to use FCS Networker for Automated Tumblr Backlinks
I am building Tumblr backlinks here, but it is the same process for any web 2.0 platform.
You simply load your Web 2.0 blogs into the FCS Networker system and you are ready to go.
First of all you are going to need to get yourself an FCS Networker account, which you can do so by following the link.
Go ahead and log into your account. The top box is for your email address, the box below is for your password.
This is the screen you will see when you first log in. You do not need to add any proxies, although you can do so if you want to. Using the FCS Networker preoxies results in high posting success rates, so I don’t bather to add my own.
Right, let’s get going. Select the “Accounts” tab on the left hand menu panel and click on “Blog Accounts”. We are going to bulk upload our Web 2.0 blogs into the system.
Now click on “Import Bulk Accounts”. You can add 50 Web 2.0 blog accounts in no time at all.
Simply follow the advised format to add any Web 2.0 blogs into the system. I have added some dummy information into the box to show you how it is done. You can add as many sites as you need too, one Web 2.0 site per line.
You can drop the backlinks into categories. When you have done that hit the “Add Accounts” button.
It should only take you ten minutes max to add 50 Tumblr blogs. Mine are all loaded and ready to go, so lets get those backlinks pumped out.
Now click on “Link Sets” on the left hand side menu panel. Then click the “Add Link Set” button at the top of the screen.
Now you need to set up your link set. This is telling FCS Networker what anchors you want used for the 50 backlinks it is going to build for you.
First of all give your link set a name. Go ahead and enter your money site URL. Then you need to enter your anchors, if you are unsure which anchors to use take a look at my perfect anchor text ratio post. That is the exact anchor text ratio I am going to use here.
Scroll down and add your secondary anchors if you require them. This is something I do not need, then hit the “Add Links” button.
Now click on “Create Projects” from the left hand menu and select “Create Blog Projects”. Then go ahead and give your project a name.
Leave the “Submission Style” set on “Post Amount Per Project” and make sure that the “Evenly” radio button is selected for “Submit Posts Across Accounts”.
Use the “Schedule” tab to drip feed your backlinks. I am going to leave it set at “0”, I want the backlinks to be done immediately.
Now we need to tell the software which accounts we want to post content to. Select the accounts tab and hit the “Add Accounts” button.
Now simply select the Web 2.0 accounts that you want backlinks from. I am going to select 50 of my high PA Tumblr accounts. You can get backlinks from many Web 2.0 platforms, including WordPress, Weebly, Jimdo and many more. To select an account just click the radio button next to it.
Scroll down and hit the “Choose” button. You will notice that the software also tells you how many posts each Web 2.0 site has on it.
Take note that you do have the correct number of Web 2.0 accounts selected. As you can see, I have 50 accounts selected.
Now select the “Article/Content” tab. Make sure you select “Auto-Gen Content”. You can also upload your own articles if you wish to do so.
If you want FCS Networker to generated the content you simply add a keyword and content category and then select the quality. I have chosen to have readable content that is 5 to 7 paragraphs in length.
I have also check the radio tab “Submit To All Accounts Once”. I do not want the same Tumblr blog to get more than one post on it.
Okay, that’s the content taken care of. All we have left to do is set up the links and images for the posts.
You will need to scroll down the page to do this.
Go ahead and select the “Linking” tab and check the “Links” radio tab.
Now you need to hit the “Choose Links Sets” button.
Now select the link set that you set up earlier. Then go ahead and hit the “Choose” button.
Make sure that you have 100% of articles set to get links. I always leave the link positioning set to random, this way everything looks more natural.
You will see I have also opted to add authority links to my articles. Just check the relevant radio button and enter your keyword. I leave the positioning of authority links set to random too.
Go ahead and select the “Images/Videos” tab, this is the last thing we need to do.
Go ahead and select the “Images” and “Videos” radio tabs. Simply enter a keyword and FCS Networker will place relevant images and videos in your content. You can even use your own images and videos if you want to.
You can set the position of the images/videos within the content and even select how many you want in there. I have selected to have 1 image and 1 video in each article.
Now scroll down and hit the “Save Project” button, this will start the backlinks flowing.
I am going to time how long it takes the software to drop me 50 Tumblr backlinks.
So it took me 5 mins to set up the campaign, it took the software 15 mins to drop the content on my Tumblr blogs.
So in just 20 minutes I got myself 50 high quality Tumblr backlinks.
To get your backlinks simply click on the “View Projects ” tab on the left hand menu panel.
To download your web 2.0 backlinks click the download icon (circled red).
Let’s take a look at the quality of the content that FCS Networker generated for me.
As you can see the content isn’t too bad at all. It’s not bad fro 20 minutes work.
What Else Can FCS Networker Do?
I should really tell you what else the software can do.
You can load in your social accounts too, so you can go ahead and give your money site social signals really fast too.
Not only that, you can add social bookmarking and PDF Sharing into the mix too.
It will pretty much do all my backlink strategies for you on auto pilot.
Here is a list of the Web 2.0 platforms that FCS Networker supports;
- Self Hosted WordPress
As you can see, it supports a whole load of Web 2.0 platforms, the list is constantly updated too. As web 2 platforms come and go they add and remove them appropriately.
So what makes this the very best automated link building software?
- It is cloud based, all submissions are done on the FCS Networker servers. There is no software to download.
- You do not need to buy any proxies.
- You can build backlinks all in one go, or drip feed them over a week. The choice is yours.
- You can build powerful link wheel and link pyramids with ease. As you know, it is a time consuming process, however the software takes all of the hard work out of it for you.
- You can build backlinks to your backlinks keeping your blogs with high page authority.
- The software will auto generate content for you. I have tested, and it will index.
- The software also has a built in indexer and a rank tracking system.
- You can also keep track of your Web 2s PA/DA and CF/TF.
- The software comes with a free add on that has to be downloaded. The add on will create fresh Web 2.0 blogs for you on autopilot. It will also generate and even verify email accounts for you.
You can see how the account creator works in the video below:
You know how powerful Web 2.0 backlinks are, this software makes it so easy to get those backlinks to all your sites fast.
The software has a flexible API and will integrate easily with just about any other SEO Software out there, including the very popular GSA SER.
You can track the number of posts that you have done each each blog, this is useful so that you do not dilute the ranking juice too much.
There is also a feature that will auto translate content and even spin and push together your content to make completely unique new articles in seconds.
As you can see from my tutorial, it is so easy to use, I have no doubt anyone can use this software.
At the time of writing it is priced at $17 per month, which is a lot cheaper than most other good SEO Software out there.
$17 a month will get you 3000 submissions per month, that is some serious backlink power you have at your finger tips.
If anything it is going to save you a hell of a lot of time, it is most definitely worth investing in if you have a large high page authority Web 2.0 network to look after.
The software is constantly growing and evolving, so you can be certain the develops are not going to abandon it.
If you are spending a lot of money on Web 2.0 backlinks because you don’t have the time to do them yourself, well FCS Networker is most definitely for you, especially is you are paying more than $17 per month already on Web 2.0 backlinks.
Today we are going to take SEO Content Machine for a spin. Let’s find out if this is the best article writing software on the seo market today.
This is not an ordinary run of the mill content generator. The software will auto post the content to your Web 2.0 sites for quick backlinks.
I am going to show you how to do this today.
We are going to create content in a few minutes. Not just any content, but unique content that is going to index, and most importantly, remain indexed.
Then I am going to show you how to post that content to your Web 2.0 sites. All of this can be done from your SEO Content Machine control panel.
This is the easy way to build backlinks to your money site.
SEO Content Machine has a free 5 day trial on offer (no payment details required), you have no excuses not to give it a go.
Add Web 2.0 Blogs Into SEO Content Machine
The very first thing that you need to do is to add your Web 2.0 blogs into the SEO Content Machine software.
For this tutorial I am going to post some unique content (generated by SEO Content Machine) to one of my high page authority Web 2.0 Wordpress blogs.
Fire up the software.
When the software loads up you will be presented with the “Content Wizard”. We do not require this option, so hit the “Cancel” button.
To add your Web 2.0 sites into the software select “Application Log” (circled red).
Now select the “Blogs Manager” tab (circled red).
Next you have two options. You can bulk upload blogs, or add them into the software individually.
I will show you how to do both options.
Click on the little arrow underneath “Add WP” and select “Bulk Load WP”.
Now enter your Web 2.0 blog details. You need your Web 2.0 blog URL followed by username and password.
You can enter a category that you want to assign the blogs to.
Then hit the “Import Blogs” option.
Single blog import:
Click on the “Add WP” button and enter your blog details. Then hit the “Save Blog” button.
You now have your Web 2.0 blogs loaded into SEO Content Machine.
Before we leave the blog manager screen we are going to create a folder to store our fresh content in.
First select the blog you have just uploaded from the left hand side panel. Then click on the “Add Folder” icon (circled red at the top).
Finally, enter your new folder details. This is where all the content will be stored for posting to that particular Web 2.0 blog.
Now hit the “Create” button.
Now it is time to generate some content to post to those blogs on complete autopilot.
Generate Keyword Target Content using SEO Content Machine
First of all we need to return to the SEO Content Machine main dashboard.
To return to the main dashboard hit the little book icon (circled red) in the top left of your screen.
Now select the “Generate Articles” icon. There are many other ways to generate content using this sofware, I will go further into this later.
Select the “Article” tab. Enter a name for your new task.
Then enter the keywords you want to generate an article around.
Under “Article Settings” I have selected the article quality to be “readable”.
I have also set the software to use the free inbuilt spinner called “Soft Spin”.
Make sure that you have the “Article” tab selected on the top menu.
Now go to the “Export” section.
In the first drop down menu select “Blog”. In the second drop down menu select “Article”.
Then hit the “Select Blogs” button.
Select the Web 2.0 blog that you want to post the generated content to.
Make sure that you select the folder you created earlier.
Then hit the “Select” button.
Select the “Article Sources” tab. I selected the “Scrape Content” radio tab. You can also use the “Article Builder” radio tab to build an article yourself as the content is scraped live.
From the drop down menu select your Google location source. You can choose from just about every country out there.
I selected to scrape content from Google USA.
Then you can select the content sources, I pretty much selected all of them, this will give optimum results. I want to make sure that I have a completely unique article.
There are many content sources including:
- Article Directories
- Custom Search Engines
- Health Sites
- News Sites
- Tech sites
- Popular Web 2.0 sites
You can even add your own custom content sources to the software. Just submit a URL that you want the software to scrape content from to build your articles.
Ignore the “Custom Content” tab, you only need to use this section if you want more control over the articles generated.
Now select the “Links” tab. Click on the “Add Link” button at the bottom of the window.
In the “URL” window pop your money site URL in there. This is the site you want to backlink to.
In the “Keywords” window enter the anchor text for your backlink.
I have selected to “Insert Link Contextually”. You can select where you want your backlink to sit within the content.
Then select the link word length. My anchor text has 6 words, I have selected Word length from 6 to 6.
The insert from section reffers to the minimum and maximum number of links to post for each piece of content. I have select 1 to 1.
Leave the format strings on default. Go ahead and hit the “OK” button.
Select the “Images” tab.
Select how many images you want in your post. I have gone with a minimum of 4 images and a maximum of 6 images.
I have set the image source to “Google” and set the images to float left within the content.
I have set the software to leave the ALT TAGS blank.
Now select the “Videos” tab. I have set the video frequency to 1, as I only want 1 video per post.
I have selected to have the video at the end of the post.
I have also selected to have a video scraped from Youtube based on my selected keyword.
Now go back to the “Article” tab and click the “Add Task” button (circled red).
Make sure that the “Run Immediately” radio box is selected. We want those articles ready to post to our Web 2.0 blog, which I will cover in the next step.
Autopost The Content To Your Web 2.0 Blogs
Now we can post some content to the Web 2.0 blogs on complete autopilot.
Now select the “Schedule Posts” icon (circled red).
Name your post uploader task. Then select the folder we created earlier, this is where our generated content will sit.
Select the number of posts you want the software to generate per blog.
Then tell the software when to post the generated content.
Now you just need to hit the “Add Task” button and your new content will auto post to your Web 2.0 sites.
To take a look at your tasks in progess do the following:
From the main dashboard click on the “Application Log” icon.
Click on the “Content Tasks” tab circled red. In the main window you will see the tasks in action complete with status update.
If you click on the “Inspect Articles” button next to each task you can take a look at the content you have generated.
This is one super fast way to generate content for your Web 2.0 sites for backlinks.
Let’s take a look at the WordPress web 2.0 site I created and posted content to using SEO Content Machine.
You can take a look at the content I generated in just a few minutes right here:
As you can see, the content is pretty good. I would not use this for tier 1 backlinks, only tier 2 and tier 3.
I checked if the content generated was unique over at plagium.com. Plagium did not find any other documents on the web using the same text.
Next I am going to use SEO Content Machine to generate 10 artciles for posting to high page authority Tumblr blogs. I am going to use the articles for Tier 2 backlinks, they will point to the WordPress site mentioned above.
I highly recommend you write your own content for Tier 1 backlinks. Then use a content generator for Tier 2 and 3 backlinks.
How To Generate 10 Articles Real Fast
It only takes a few minutes to generate 10 readable articles using SEO Content Machine. This is the best article writing software simply because you can generate unique readable content very fast.
From the main dashboard click on the “Generate Articles” icon.
Select the “Article” tab:
Give your task a name. Then enter the keywords you want the software to scrape an article based around.
I have set the article quality to be “unique” with a minumum of 10 paragraphs. I have selected to use the inbuilt spinner and set the number of articles required to 10. You can select the “Protect Words” button to ensure those words do not get spun.
Then select the folder on your PC that you want the artciles to be saved in.
Select the sources that you want the software to scrape content from to build your 10 new articles.
You can even add custom sites to the list. It is a complete scrape tool, you can’t fail to build decent content with this software. I suppose if you spend enough time on each article you could use it for Tier 1 backlinks.
I am going to ignore the “Custom Content” and “Links” tab for this tutorial.
Under the “Image” tab I have set the software to add 2 to 4 images per article generated. I have set the image source to be from “Google”, other options are “Creative Commons” and “Custom”.
I have set the image size to 250 pixels and to be placed to the left, right or centre just to mix it up a bit. I have left the ALT TAG field blank.
Select the “Videos” tab. I have set the software to add one video to each article to be situated below the content. I have added the URL to a custom video I had made.
The “Replace” and “Schedule” tabs can be ignored, I want this task to start right away.
Go back to the “Article” tab and hit the “Add Task” button. Make sure that you have the “Run Immediately” radio box selected.
In the “Application Log” under “Content Task” you will get a progress report of your articles being generated.
When you get a green light next to your task name you know it is complete. Click on the “Inspect Articles” button to take a look at the generated content.
You could also simply go to the folder you saved them in on your hard drive.
When you click on the “Inspect Articles” button you get this window. It tells you how many words each article is in length, my articles range from 1000 words to 2500 words, which is pretty sweet for 5 minutes work.
You can add to the content from this window and even re-spin it, or even spin just part of it. The possibilities are endless, this is by far the ultimate article generator out there, and it’s very reasonably priced too, unlike some of the alternatives.
Pretty much everything I have explained in this section can been seen in this video:
I wil drop this content on 10 high page authority Tumblr blogs. I will list the Tumblr blog URLs below for you to take a look at the quality of the content that can be generated using this software in just 5 minutes.
I think you will agree that the content is pretty good for 5 minutes work. It is perfect for Tier 2 backlinks.
I have run the content through Plagium and it is all unique and is sure to index.
Generate Tier 1 Content
I am going to use the “Tier 1 Content Creator” module.
I will drop this content below for you to take a look at.
Let’s get started:
Select the “T1 Content Creator” icon.
Enter your keyword into the “Snippet Finder” drop down menu and hit the “OK” button.
Now select the Google search engine region that you would like to scrape content from.
Hit the “Sources” button and select the sites you want SEO Content Machine to scrape content from.
I need Tech and Health/Beauty and medical sites, so I have those sources ticked off and ready to roll.
The more sources you have the better chance you have at creating a new and unique article.
Hit the “Search” button and the software will start to scrape content for you.
You will see a progress bar in the bottom right of your window. You can hit the cancel button to stop the scrape any time you need to.
Sit back and wait for the software to search for all that lovely content for you, the more the better.
When the search is complete the content snippets will appear in the laft hand window.
Now you can start to build up your new article. Select the snippets that you want to use from the left hand panel window.
The first column has a number, which is there to tell you how relevant that snippet is to your selected keyword. It is best to have a high number here.
As you can see the next colum is the content itself. The last column is the content word count.
Just select the snippets you want and away you go to build and article really fast.
If you don’t want to read through the content and build the article yourself the software will do it for you 🙂
Hit the “Generate Article” button and the software will build the article for you into the right hand window in a few seconds.
The software will show you in the left hand panel which snippets have been used to construct the article.
You can right click the mouse button in the right article builder window to insert a unique introduction.
You can click anywhere in the window to add and remove text as you see fit.
Simply double click on the snippets in the left hand window to add them to your content in the right hand window.
You can remove content/words by highlighting the section that you want to cut and then click on the right mouse button and select “cut”.
Finally, you hit the “Spin It” button to make it unique.
I knocked out a completely unique 600 word article in under 10 minutes.
Here is a little section of the article I created:
I didn’t spend very long on this content.
If you spend 15 to 20 minutes on your article you can get something that is most definitely good enough for use on your Tier 1 sites.
Why Is This The Best Article Writing Software
I have been very impressed with the software so far. The content is amazing, there is no limits to content creation with this software.
Let’s take a look at what other tasks the software can do for you.
The option to add custom content sources to scrape from means you are not going to end up with the same results everytime.
Your link bulding can be done on complete autopilot, SEO Content Machine supports:
- GSA SER
- Ultimate Demon
- FCS Networker
- Magic Submitter
The software is very easy to use, you don’t even need proxies for this software to work, although there is an option for you to add them if you want to.
It can even pump out articles in many languages and will integrate with Google translate to swap articles from one language to another.
The software has its own inbuilt free spinner, however it also integrates with all the popular spinners out there today.
This is the best article writing software that I have used to date. SEO Content Machine is free to download right now for 5 days, go ahead and give it a whirl and let me know what you think in the comments below.
You can use the Money Robot Backlink Maker Software to get backlinks from web 2.0 sites on autopilot with ease and speed.
You don’t even have to write or scrape the content. Money Robot does it all for you.
I am going to show you how the software works, it is very easy to use.
The software is going to really ramp up your backlink building efforts.
I am going to use the Money Robot software to rank this page for the keyword “backlink maker”. This will give you a good indication how well the software works.
First of all let’s set some parameters to go by.
My selected keyword is pretty easy.
Here are the seo competition scores:
Let’s see how long it takes the Money Robot backlink maker software to rank a keyword with an seo competition score of 31.
As you can see, the selected keyword has a very low competition score of just 22 on SpyFu.com.
Before we dive into the tutorial I am going to run over the basics about what this software can do.
What Can The Money Robot Backlink Maker Do For You?
First and foremost, it is very easy to use. Absolutely anyone can use this software.
I have been most impressed with the built in article maker and spinner.
This really is a set and forget backlink maker.
We all know that Web 2.0 backlinks are highly effective at pushing a site to the top of the SERPs.
If you do not have the time to make the Web 2.0 sites manually this is the best option for you.
The software will build you very powerful tiered links. It has different strategies built into the system for you to choose from, you can even set up your own seo diagrams.
Here is the full set of platforms that the software will get you backlinks from:
- Web 2.0 Sites
- Press Release
- Social Bookmarks
- Web Directories
- Article Directories
- Forum Profiles
- Web 2.0 Profiles
- Social Signals
You can use these platforms to build an effective tiered backlink strategy.
I don’t want to blast on too much about what it can do.
Take a look at the video if you want to know some more about what it can do:
You are only interested in the ranking results. You want to know if this software can get you a no. 1 rank in Google search.
So let’s get started and put the Money Robot software into action.
Let’s Rank Using Money Robot Backlink Maker
Fire up the software and you get this interface;
First of all let’s take a look at the “settings”.
Under the “Settings” tab you will be presented with 5 options.
The main “Options” tab can all be left on default. I am going to run the software on a regular laptop on home Wifi.
I am not going to use anything other than the software provided.
Of course there are additional costs involved to make life easier.
When I tested the software I used a premium Capthcha service and my own dedicated proxies.
For this tutorial I am not going to do that.
I will use the free Captcha service that is built into the Money Robot software.
I should also mention that the best premium Captcha service to use with this software is the 2captcha.com service. The deathbycaptcha.com service is a little bit more expensive.
Under the “Proxy” tab select “Use Money Robot Proxy System”.
When I used my own dedicated proxies the software built a mass of Web 2.0 backlinks in one day.
For this tutorial we are going to see how the Money Robot Proxy system holds up.
The “Theme” and “Licence” tabs can be ignored.
Click on the “New Campaign” button to get started (circled red).
Give your new campaign a name. Then enter the URL that you want to rank. Then enter the keyword that you want to rank for.
You do not need to add any additional keywords to mix up your anchor text, that is all taken care of.
The next part is what impressed me most.
You can click on “create unique articles using MR artcile builder”, the software will import a fully spun article in seconds for you to use. You do not need any additional software like Kontent Machine here.
You can even load and spin your own articles from folder.
I want to see what effects this software can have with minimal effort, so I am going to have Money Robot process the content for me.
Now it is time to select your “SEO Strategy”.
This is what you have to choose from:
- 3 low competition seo strategies
- 3 medium competition seo strategies
- 3 high competition seo startegies
You can even import strategies that people have used and recommend from the Money Robot website.
You can take a look at the best seo diagrams here. For this tutorial I am going to use the second diagram on the list.
If you want to do the same you can import the diagram as shown below;
The diagram code is: BA0CF8YW
They state that this is the most used seo diagram by experts.
As you can see, the backlink strategy consists of Web 2.0 backlinks and social signals only.
On tier 1 we have Web 2.0 backlinks.
Tier 2 has Web 2.0 sites and social signals.
Tier 3 has Web 2.0 sites only.
It is recommended that you run this campaign four to six times to see great results.
So let’s put that to the test.
First of all we need to import the diagram:
Right click on your mouse in the “diagram area”. Then select “Import Diagrams”.
Enter the ID of the diagram that you want to import and click “OK”.
Now you will see the new SEO diagram in the software.
You can spread the Web 2.0 and social signal submissions over a series of days if you want to. I am going to select “0” here, I want the submissions to be done right away.
I also make sure that the “Run now” box is not selected. We need to set up a few more criteria before we go ahead and run the campaign.
Next you just have to hit the “Create Campaign” button.
Now we need to set up our backlink profile. Go ahead and double click (left mouse button) on the Tier 1 Web 2.0 blog tasks.
Click on the “Insert Link” tab and enter the URL of the site that you want to rank. Then enter your anchor text profile into the “Keywords (Separated By Comma)” box.
This is the anchor text profile that I am going to use on Tier 1:
- Exact Match Anchor
- Click Here
Then go down to the “Blog Address: (Subdomains)” section and enter your keyword in there a few times.
This is what I used:
This will ensure that our keyword is used in the sub domain URL of the Web 2.0 site.
Do not have a space in between keywords or the Money Robot software will reject them.
So it will need to look like this:
Make sure you have your preferred anchor text profile set up in the “Tags:” section.
- exact match keyword
- click here
In the right hand window you will see a full list of all the Web 2.0 sites. You can check and un-check the radio button to select the sites you want to use.
I am going to leave all the sites checked, you want to get the full impact.
There is a whopping 77 Web 2.0 sites in the list. In Tier 1 we are going to get 77 backlinks on autopilot from high domain authority sites.
Now you just hit the “Save” button and we are ready to set up the other Tiers.
Now double click (left mouse button) on the “Social Like and Shares….” set up.
Now check or un-check the radio box to tell the software which social sites to use. I am going to leave all of them selected as shown in the image above.
Remember to hit the “Save” button if you make any changes.
Now it is time to set up the Tier 2 backlinks.
Tier 2 backlinks are split up into 3 sections. You can set up each section following the same process as before.
The Tier 2 looks like this:
- Web 2.0 backlinks (T2 A)
- Web 2.0 backlinks (T2 B)
- Web 2.0 backlinks (T2 C)
I am going to double click on (T2 A) to set up the anchor text profile. Of course it will be a little different from what we did on Tier 1.
All we are going to change here is the “Tags:” section. We are going to enter the following for the anchor text profile:
- backlinks maker
- go here
I am not going to touch the “Blog Address: (Subdomains)” section here. I am not concerned about having the keyword in the sub domain URL on Tier 2 or Tier 3.
Remember to hit the “Save” button.
There is 77 Web 2.0 blogs on each part of Tier 2 and Tier 3.
Repeat this process for the rest of the Tier 2 and Tier 3 sections.
Below is the anchor text that I added into each “Tags:” section for each part of each Tier.
- click here
- visit this site
All Tier 3 backlinks will remain on default settings.
There will be no exact match anchor text used at all on Tier 3 backlinks.
The anchor text will be random words only like “read more”, “get more info” etc.
You can leave the “Profiles” tab set on default. These are the names that the software will set the Web 2.0 and Social account profiles under.
The “URLs” tab will give you a list of live URLs that you have backlinks from.
The “Logs” tab details what actions you have done so far on the software for that particular project.
You do not need to add any social accounts into the software. The software will set them all up for you on auto pilot.
You are now fully set up and ready to roll out those backlinks.
Make sure that you select -Manual Captcha- unless you have a premium service set up under the settings tab.
I also have “5 Threads” selected as default.
Hit the “Start Task” button to get those backlinks started.
As the software runs you will get a progress report.
As you can see the Money Robot software is creating the Tier 1 A Web 2.0 accounts.
The bottom window gives you a running progress report.
You know exactly which Web 2.0 sites the software is working on at the moment.
You can actually see the software working live by selecting the “Progress Window” button.
You can actually watch the Money Robot backlink maker software setting up the Web 2.0 sites for you on auto pilot.
As you can see the software is working on 6 Web 2.0 sites at the same time.
This is going to save you heaps of time in your backlink building process.
Every now and again you will have to solve a Captcha, unless you have added a premium Captcha solving service of course.
This certainly beats setting up the accounts yourself.
You can select the “URLs” tab to take a look at all the backlinks that the software has created on autopilot.
You are going to need these URLs further down the line to get them all indexed using Google Console.
Only index Tier 1 backlinks using Google Console. Let the rest index naturally.
Only index 3 a day max.
You should also be aware that the software sends all links to indexers automatically.
If you do want to be running completely on auto pilot you are going to have to sign up to a premium Captcha solving service.
The built in free proxies work just as well as my private dedicated proxies, which is great.
You are not going to have to purchase any proxies to use this software.
You will need to get a premium Captcha solving service if you do not want to do them yourself. There isn’t that many to do actually.
If you do want to use your own proxies I highly recommend buyproxies.org. I use them myself, they are the best you can get for the price.
If you want to use a Captcha solving service I highly recommend 2Captcha.com. You get 1000 Captcha’s solved for as little as 0.5 USD.
A $10 spend will last you a few months using the Money Robot backlink maker software. That’s a whole lot of backlinks for just 10 bucks and a whole lot of time saved too.
Import accounts into Money Robot link maker software:
For all of you that use the expired Web 2.0 backlinks strategy you will be pleased to know that you can import existing Web 2.0 accounts into the software.
This means you can use high PA expired re-registered Web 2.0 sites on Tier 1 and juice them up with new Web 2.0 sites on Tier 2 and 3.
This is how you import accounts into Money Robot:
First click on the “My Accounts” tab and the select “Import your accounts” (circled red).
First select the Web 2.0 site from the drop down menu. Then enter your Web 2.0 account details as follows:
Then hit the “Import Accounts” button, job done.
You could have 5 high PA Tumblr and Weebly blogs on Tier 1 and lots of new Web 2.0 sites on Tier 2 and 3 combined with social signals and bookmarks.
That’s pretty much it. This is an awesome piece of software, the ultimate Web 2.0 backlink maker.
How To Post To Existing Web 2.0 Accounts
If you already have your web 2.0 accounts set up, for example your re-registered expired Weebly and Tumblr blogs with high page authority, you can use Money Robot to post content to them.
The good thing about this is that there will be no Captcha costs at all.
As the software has no accounts to set up, no email verification and no Captcha’s to solve the running time will be up to 70% less.
I am now going to show you how to post to existing Web 2.0 accounts fast and easy.
First of all you need to click on “New Campaign”.
Right click on your mouse where it is circled red on the image above, then select “Advanced”.
Now click on the “Accounts” tab. Then select “Use my already existing accounts”.
Now click on “Add new Category” and give it a name, then hit the “OK” button.
Then enter your money site URL that you want to rank no. 1.
Then enter your main keyword.
Then select the “Generic Keywords” tab to set up your anchor text profile for this campaign.
I used 70% for generic keywords. Therefore my main keyword will be used 30% of the time as the anchor text.
My generic anchor text profile looks like this:
- click here
- full post url
- more info
- go here
Click on “Create unique article” to load in an article. Select the YouTube icon and paste the YouTube video URL into the box. This will add a video to your post. Then select the image icon, paste the image URL into the box. This will add an image to your post.
You can click on the “link/article” text to select how many backlinks to want per post.
You will also need to select an Seo Strategy diagram to use.
Then deselect the “Run now” radio button and hit the “Create Campaign” button. You do not need to deselect the “Run now” radio button if you have already added your Web 2.0 account details into the category you selected earlier.
Now you need to add your Web 2.0 account details to the category you just set up.
First select the “My Accounts” tab.
Then select the category from the drop down menu that you just set up.
Then click on the “Import your accounts” text.
Now enter your Web 2.0 account details and hit the “Import Accounts” button.
I am going to import 15 aged high PA Tumblr accounts for this campaign.
Now hit the “Start Task” button. You will notice that the status will read “Resubmission Task”, this means that you are going to post to existing blogs.
Sit back and watch those lovely backlinks roll in. Remember to get them indexed.
Money Robot backlink maker will do all the work for you. All those tedious tasks you hate will now be done on complete autopilot.
This will certainly take your backlink building to the next level.
What Else Can Money Robot Do?
You can add social signals to any site from 22000 trusted social accounts.
You can also add views and likes to your YouTube videos from 18000 trusted accounts and counting.
To add social signals select the “Socials” tab and then click on “Add your URLs”.
Simply enter the URL that you want to gain social signals to and hit the “Insert URLs” button.
Now you will see your social signal count go on the rise on complete auto pilot. These are real social shares from real accounts.
Select the “Video” tab to add YouTube views and likes.
Click on the “Add your video URLs” text and submit your URL and click the “Insert URLs” button.
Your YouTube video will now get views and likes on complete autopilot.
Money Robot Backlink Maker Software Results
I will log the ranking results here.
This will prove to you that the software is a worthwhile investment.
I love the fact that it’s not just a backlink maker. You can also improve your social signals too.
If you use the software wisely you will see a very good return on your investment.
Ranking a YouTube video alone could see you a nice little return on the software outlay.
Post Published: 31/10/2016
Post Indexed: 31/10/2016
Rank: 31/10/2016 keyword not in top 50 (zero backlinks created)
01/12/2016 rank is not in the top 50. This is after one month backlink building using the Money Robot software. The results are not so good so far. I hope things pick up in month 2, let’s wait and see.
04/01/2016 Google.com rank is now 42. The page is on the rise, although it’s not very impressive. I will keep pumping out the backlinks with Money Robot and record the rankings in another month.
I am going to show you how to automate your backlinks for free.
There is a super cool PBN, web 2.0 and Social Bookmark automation service called Rankwyz.
This service combined with Kontent Machine is super powerful. However, you do not require Kontent Machine.
Everything can be done for free on auto pilot.
If you do not have the funds to buy Kontent Machine you can use my free blog content generator method along side the free Rankwyz account.
Basically, what we are going to do is load 10 articles into Rankwyz.
Rankwyz will then upload these articles including images and videos to 10 web 2.0 sites of our choice on auto pilot.
The service will either create new web 2.0 sites for you, or you can use your own web 2.0 sites.
For this tutorial I am going to use Rankwyz to post content to 10 expired Tumblr accounts that I have registered under one email address.
Now we can generate index able content really fast and upload it onto our web 2.0 sites super quick.
This means we do not have to log into each Tumblr blog and upload the content manually, the Rankwyz service will do it for us, even on a free account.
Before we start getting those backlinks we need 10 expired Tumblr blogs all registered under one email account. To learn how to scarpe expired Tumblr blogs for free go here.
When you have your Tumblr blogs registered and ready to roll we need some content to put on them.
Use my free blog content generator method to do this.
If you have Kontent Machine you can skip the content generator part because it integrates with Rankwyz. All you need to do is integrate Kontent Machine with Rankwyz and start the process below, getting the content uploaded onto those blogs.
Take a look at this video on how to integrate Kontent Machine with Rankwyz;
Now you must have the following before we crack on:
- 10 expired Tumblr blogs (or any web 2.0 blogs of your choice)
- 10 pieces of content (unless you are using Kontent Machine)
Let’s get started;
How To Automate Your Backlinks
Get on over to Rankwyz.com and sign up for a free account and log in.
You will be presented with the Dashboard. If not click the “home” icon and then select “Dashboard” (circled red).
Now click on “first project” (circled red).
Now click the “+ New” button (circled red) opposite the “Networks” heading.
Make sure that you have “Web2 Network” selected. Make sure that it is marked as Tier 1. Then enter your network name and description as I have done. Then hit the “+create” tab.
Now click on the Blue anchor text, the name of the network that you just set up (circled red).
Now we have our network ready to roll.
Next we need to add the content to the network.
Then we need to add the expired Tumblr blogs or any web 2.0 sites to the network.
You can add any web 2.0 sites to the network that you want backlinks from.
This is how you do it;
Make sure you have the “Submissions” tab selected. Then select “+New Bucket” (circled red).
Name your content bucket. Make sure that you select “Own articles” and then hit the “save” button. You could also sign up for ArticleBuilder.net, which will create unique articles for you, saving you lots of time.
Make sure you have the “Upload articles” tab selected. Then click on the “Upload multiple” (circled red).
Make sure that your content documents are saved as a .txt and not .doc or they will not upload.
Scroll down to the bottom of the page and click “Add Files” (circled red). Select your 10 content files and click “open”. Then hit the “Start Upload” button.
Now you will see your 10 articles uploaded in the “Uploaded articles” tab. Now we need to tinker with the settings to tell Ranwyz how to upload these articles to our expired Web 2.0 sites.
Click on the “Settings” tab (circled red). Now scroll down. We are going to tell Rankwyz to insert scraped images and videos into our Web 2.0 posts.
This is how I set up the image settings for my content. Make sure that you have “include images” and “include videos” selected.
Rankwayz will scrape images for you and add them into the post on auto pilot. So select “scraped images/videos”. You can use your own, but I don’t see the point here.
Select your image category and the position you would like Rankwyz to place the image within your content. Then select the number of images that you want Rankwyz to add to the content. 1 is enough for my posts.
Ignore the Links tab settings. Just make sure that the “insert links” radio is not selected. We will set up our anchor text profile for our links later.
Now let’s sort out the Advanced Settings. Select a language, I put in do not translate. I put “best epilator” in the Tags list, selected the “random” radio button and selected to have 1 tag per post.
I did not add anything to the categories list, I just made sure “random” was selected.
Scroll back to the top and hit the “Save” button.
Click on the “Overview” tab. Then click the “Status” drop down menu at the right hand side of your screen and select “active”. We need our articles to be active for them to upload to our Web 2.0 sites.
Now it is time to add our Web 2.0 blogs to the network.
Go back to your dashboard by clicking the home button. Then click on the “First Project” link again.
Now click on your network link.
Now select the “Blogs” tab (circled red).
Now click on the “Tumblr” tab (circled red). If you want to add any other Web 2.0 blogs to your network just click on the “+Add” tab to the right of your screen.
Now add your Tumblr account Email and password and then hit the “Authorize” button (circled red). This will add all 10 Tumblr blogs registered under that email to your Rankwyz account. You can add blogs individually by using the “+Add” tab as shown above.
After you click “Authorize” you will be taken to Tumblr, just login.
Now click the “Allow” button to give Rankwyz permission to post to your Tumblr blogs.
Now you will see all your Tumblr blogs or your selected Web 2.0 blogs in your network, all ready to post your content to.
Now it is time to post your content to the Web 2.0 blogs on auto pilot.
Click on the “Submissions” tab. Then select “New Submissions” and then select “+Post Submission”.
Enter your Post submission name. Then select to use “My Content” and select the name of your content bucket that we set up earlier, this is where we uploaded our 10 pieces of content.
Now select Post to: “all blogs in network”. I selected “sequential” posting.
Then select the number of posts you want per blog. Set this to 1, and then select the “posts on each blog” radio button.
I leave the “spread posts” and “repeat posts” un selected. You can select the “Spread posts” radio to give a set time to post to your Tumblr blogs e.g Rankwyz will post your 10 artciles to your 10 blogs over a 1 hour period or more. I just want them all posted right away, so I do not select this option.
Scroll down to the link settings.
Pop in the URL of your money site, the site you want your Web 2.0 blogs to backlink to. Then enter the anchor text that you want Rankwyz to use on every post. I used the anchor text as follows;
visit this site
Leave the rest of the options under the “Link Settings” tab un-checked.
Scroll down to see the “Send successful post tab”. You can send the successful post to boomarking, blogging and social networks if you want to. I leave these un-checked because I have not set them up and think it is not necessary here.
Now hit the “Save” button (circled red).
Now hit the “Activate” button (circled red).
Now click on the “Posts” tab. You can let Rankwyz do it’s thing, it will publish your articles to your Tumblr blogs or any Web 2.0 blog that you selected on auto pilot.
To speed the process up you can hit the “Post Now” text (circled red) and Ranwyz will instantly post content to that Tumblr or Web 2.0 blog.
Click on the “completed” tab (circled red) to see all your completed Tumbr and Web 2.0 blog posts all done on auto pilot.
You can click on the blog link to check out your blog post.
How cool is that. Rankwyz will have used your selected anchor text profile and inserted a scraped image and video into the post for you completely on auto pilot.
If you want to take a look at the blog posts that Rankwyz did for me here are the URL’s;
How cool is that. You can now auto generate content and even auto post the content to your Web 2.0 blogs for free.
That’s how you automate your backlinks. Of course if you get articlebuilder.net or KontentMachine.com the whole process will be even faster. How awesome is this, you can now get Web 2.0 backlinks on ten posts in super quick time.
If you don’t have time to scrape expired Tumblr blogs with high page authority and lots of backlinks pointing to them use this gig on seoclerk.com. He gave me 75 expired Tumblr blogs for just $5. All I had to do was register them, I did that under some mail.com email accounts for free.
Get Those Backlinks Indexed
Now you have 10 new backlinks from high page authority web 2.0 sites with lots of backlinks pointing to them.
These links are worthless unless Google knows that they exist.
The easiest way to get these backlinks indexed is to use Google console.
Simply sign up for a Google account, you require one to use Google console.
Then Google search “add url to google” and click on the top listing.
Then log into your Google account.
Add your Web 2.0 URL into the text field and then hit the “Submit Request” button.
Now go back to Google search and enter your Web 2.0 URL into the search bar.
If your Web 2.0 appears in the search results you are set to rank. Google is aware of your new backlink and your ranking will improve very soon.
Go ahead and automate your backlinks now, it is free to do, so why not.
This method is going to save you loads of time and will be a real game changer for most people.
If you are a one person ranking machine you are going to love this method.
Let me know how you get on in the comments.